Deep Groove Ball Bearings

Contact Now

Deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds,

accommodate radial and axial loads in both directions and require little maintenance.

Because deep groove ball bearings are the most widely used bearing type, they are available from SKF in many designs,

variants and sizes.

In addition to the bearings presented in this section, deep groove ball bearings for special applications are shown under Engineered products. These bearings include:

* Sensor bearing units
* High temperature bearings and bearing units
* Bearings with Solid Oil
* INSOCOAT bearings
* Hybrid bearings
* NoWear coated bearings
* Polymer ball bearings

Single row deep groove ball bearings are available capped (with seals or shields) or open.

Open bearings that are also available capped may have recesses in the ring side faces.

SKF inch bearings in the EE(B), RLS and RMS series are intended as aftermarket items and, therefore,

SKF recommends not using these bearings for new bearing arrangement designs.

Stainless steel deep groove ball bearings are available capped (with seals or shields) or open.

Open bearings that are also available capped may have recesses in the ring side faces

Single row deep groove ball bearings with filling slots have a filling slot in both the inner and outer rings to accommodate more balls than standard deep groove ball bearings.

Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots,
but their axial load carrying capacity is limited. They are also unable to operate at the same high speeds as bearings without filling slots.

Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.

    INA Singapore 4429 Thrust Ball Bearing

    Original FAG
    Refer to Our Quality Control INA Singapore 4429 Thrust Ball Bearing

    INA Vietnam 4207-B-TVH Ball Bearings

    Original INA
    Refer to Our Quality Control INA Vietnam 4207-B-TVH Ball Bearings

    FAG Finland BEARING 6002-THB-C3 Ball Bearings

    Original INA
    Refer to Our Quality Control FAG Finland BEARING 6002-THB-C3 Ball Bearings

    FAG Korea BEARING 61816-2RSR-Y Ball Bearings

    Original FAG
    Refer to Our Quality Control FAG Korea BEARING 61816-2RSR-Y Ball Bearings

    INA Vietnam 4204 Ball Bearings

    Original FAG
    Refer to Our Quality Control INA Vietnam 4204 Ball Bearings

    FAG Australia BEARING 6002-THB Ball Bearings

    Original INA
    Refer to Our Quality Control FAG Australia BEARING 6002-THB Ball Bearings

    INA Poland 4425 Thrust Ball Bearing

    Original FAG
    Refer to Our Quality Control INA Poland 4425 Thrust Ball Bearing

    FAG Korea BEARING 3305-B-TVH-C3 Ball Bearings

    Original INA
    Refer to Our Quality Control FAG Korea BEARING 3305-B-TVH-C3 Ball Bearings

    FAG Thailand BEARING 6002-C-2HRS Ball Bearings

    Original FAG
    Refer to Our Quality Control FAG Thailand BEARING 6002-C-2HRS Ball Bearings

    FAG Brazil BEARING 61813-2Z-Y Ball Bearings

    Original FAG
    Refer to Our Quality Control FAG Brazil BEARING 61813-2Z-Y Ball Bearings

    FAG Korea BEARING 3303-B-2Z-TNH Ball Bearings

    Original FAG
    Refer to Our Quality Control FAG Korea BEARING 3303-B-2Z-TNH Ball Bearings

    FAG Philippines BEARING 6002-P53 Ball Bearings

    Original FAG
    Refer to Our Quality Control FAG Philippines BEARING 6002-P53 Ball Bearings
    1/4747